• Part I: Procedural Guide and Design Requirements
• Part II: General Conditions
• Part III: Technical Specifications
• Part IV: Standard Drawings
• Part V: Rules and Regulations for Recycled Water

Request Plans or Drawings Online

100 Procuring Service from the Moulton Niguel Water District
200 District Charges, Connection Fees, and Other Costs
300 Design and Inspection Procedures
400 Design Criteria, Sewer Facilities
500 Design Criteria, Domestic Water Facilities
600 Design Criteria, Off-Site Recycled Water Facilities
Appendix 1 Application to and Agreement with the Moulton Niguel Water District for Water and Sewer Service
Appendix 2A Bill of Sale - Domestic Water System Facilities
Appendix 2B Bill of Sale - Sewer System Facilities
Appendix 2C Bill of Sale - Recycled Water System Facilities
Appendix 3A Cost of Construction Statement - Domestic Water System
Appendix 3B Cost of Construction Statement - Sewer System
Appendix 3C Cost of Construction Statement - Recycled Water System
Appendix 4 Domestic Water, Sewer, and Recycled Water Bond Worksheet
Appendix 5A Sample Easement
Appendix 5B Sample Easement Certificate of Acceptance
Appendix 5C Sample Subordination of Deed of Trust to Easement Deed
Appendix 6 Wastewater Discharge Questionnaire
Appendix 7 Permit Extension Letter
Appendix 8 Requirements for Installation Prior to Curb and Gutter

100 DEFINITIONS AND ABBREVIATIONS
200 SCOPE AND CONTROL OF WORK
      200.1 RESPONSIBILITY FOR FURNISHING MATERIAL AND INSTALLATION
      200.2 GUARANTEE
      200.3 LICENSES, PERMITS, AND FEES
      200.4 PLANS AND SPECIFICATIONS
      200.4.1 General
      200.4.2 Shop
      200.5 WORK TO BE DONE
      200.6 RIGHT OF WAY
300 CONTROL OF MATERIALS
      300.1 MATERIALS AND WORKMANSHIP
      300.2 PROTECTION OF WORK AND MATERIALS
      300.3 INSPECTION REQUIREMENTS
400 UTILITIES
      400.1 LOCATION
      400.2 PROTECTION
500 PROGRESS, ACCEPTANCE OF WORK, AND PROSECUTION
      500.1 CONSTRUCTION SCHEDULE AND COMMENCEMENT OF WORK
      500.2 PROSECUTION OF WORK FOR OFFSITE CONSTRUCTION
600 RESPONSIBILITIES OF CONTRACTOR IN CONDUCT OF WORK
      600.1 SUPERVISION
      600.2 NO PERSONAL LIABILITY
      600.3 RESPONSIBILITY FOR DAMAGE
      600.4 LEGAL RELATIONS AND RESPONSIBILITY
      600.5 STORAGE OF EQUIPMENT AND MATERIALS IN PUBLIC STREETS
      600.6 STREETS CLOSURES, DETOURS, BARRICADES
      600.7 PUBLIC SAFETY
      600.7.1 Safety Orders
      600.7.2 Use of Explosives
      600.8 CAL OSHA REQUIREMENTS
      600.8.1 Trench Work
      600.8.2 Confined Space
      600.8.3 Permit-required Confined Space

01045 Existing Facilities
02200 Structure Earthwork
02223 Trenching, Backfilling and Compacting
02315 Jacked Casing
02701 Installation of Gravity Sewer Pipelines
02710 Vitrified Clay Pipe
02715 PVC Gravity Sewer Pipe
03300 Concrete
03461 Precast Reinforced Concrete Manholes and Manhole Bases
03462 Precast Concrete Vaults
03463 Grease Interceptors
09900 Painting and Coating
13110 Corrosion Protection and Joint Bonding
15041 Chlorination of Domestic Water Mains and Services for Disinfections
15042 Hydrostatic Testing of Pressure Pipelines
15043 Leakage and Infiltration in Testing of Non-Pressure Pipelines
15050 Hot Tap Connections
15056 Ductile-Iron Pipe and Fittings
15057 Copper, Brass and Bronze Pipe, Fittings and Appurtenances
15064 PVC Pressure Distribution Pipe
15072 Asbestos Cement Distribution Pipe (6-inch through 16-inch)
15076 Cement-Mortar Lined and Coated Steel Pipe
15089 Combination Air and Vacuum Release Valve Assembly
15100 Manual Valves
15112 Backflow Preventers
15139 Fire Hydrants
15150 Meters
15151 Domestic & Recycled Water Facilities Identification
15162 Flexible Pipe Couplings and Expansion Joints
15300 Automatic Control Valves

W-1 Standard 3/4" & 1" Water Service
W-2 Standard Water Meter Manifold
W-3 Standard 1-1/2" & 2" Water Service
W-4 3",4",6"8" and 10" Standard Meter Commercial Continuous Flow Meter
W-5 3",4",6"8" and 10" Irrigation Meters
W-6 Hot Tap
W-7 Standard Fire Hydrant
W-8 Valve Assembly
W-9 Standard Combination Valve Assembly
W-10 Standard Temporary Plug and Blow off Installation
W-11 Pipe Bedding
W-12 Typical Thrust Block
W-13 Steel Casing Pipe
W-14 Design Criteria For Separation of Water and Sewer Mains for New Water Mains
W-15 In Vault Private Fire Service
W-15A Above Ground Private Fire Service
W-16 Backflow Preventers (3" and larger)
W-17 Backflow Prevention Device (2" and smaller)
W-18 Concrete Encasement and Slope Anchors
W-19 Guard Post Detail
W-20 Not Used
W-21 2-Wire Test Station
W-22 At-Grade Test Box
W-23 Buried Insulating Flange
W-24 Buried Insulating Flange At-Grade Test Station
W-25 Above-Grade Insulating Flange
W-26 4-Wire Casing Test Station
W-27 Post Mounted Test Station
W-28 Alumino - Thermic Weld
W-29 Zinc Anode for Services & Air-Vacs
W-30 Mechanical Joint Bond
W-31 CML&C Steel Pipe Joint Bond

S-1 Standard Manhole
S-2 Typical Concrete Base and Joint Details
S-3 Manhole Frame and Cover for 48" Manhole
S-4 Manhole Frame and Cover for 60" and 72" Manhole
S-5 PVC Pipe Bedding
S-6 Typical House Lateral
S-7 Typical Sewer Saddle and Cut-in Wye Connection
S-8 VCP Pipe and Bedding Details
S-9 Concrete Encasements Type A,B & C
S-10 Concrete Slope Anchors
S-11 Steel Casing Pipe
S-12 Design Criteria for Separation of Water and Sewer Mains for New Service Mains

RW-14 Design Criteria for Separation of Water and Sewer Mains for New Recycled Water Mains

Standard Details Drawings
IRR-1 Air Gap Model (TIF)
IRR-2 Appurtenance Layout (TIF)
IRR-3 Wye Strainer (TIF)
IRR-4 Basket Strainer (TIF)
IRR-5 Backflow Prevention Device (TIF)
IRR-6 Backflow Prevention Layout (TIF)
IRR-7 Pressure Regulator Installation (TIF)
IRR-8 Master Control Valve (TIF)
IRR-9 Flow Sensor (TIF)
IRR-10 Remote Control Valve (TIF)
IRR-11 Ball/Gate Valve (TIF)
IRR-12 Quick Coupling Valve (TIF)
IRR-13 Design Criteria For Separation of Onsite Water and Sewer Mains For New Recycled Water Mains (TIF)
IRR-14 Trenching (TIF)
IRR-15 Pipes Under Paving (TIF)
IRR-16 Thrust Blocks For Plastic Pipe (TIF)
IRR-17 Terrace Drain Crossing (TIF)
IRR-18 Rotor/Pop-Up Sprinkler Head (TIF)
IRR-19 Rotor/Sprinkler Head On Grade (TIF)
IRR-20 Shrub Spray On Riser (TIF)
IRR-21 Slope Conditions (TIF)
IRR-22 Pipe Stabilizer On Grade (TIF)
IRR-23 Controller (TIF)
IRR-24 Branding Guide (TIF)
IRR-25 Above Ground Pipeline/Hose Identification (TIF)
IRR-26 Identification Tags and Labels (TIF)
IRR-27 Recycled Water Site Identification Sign (TIF)
IRR-28 Plan Criteria, Signature Block Layout (TIF)
IRR-29 Plan Notes (TIF)
IRR-30 Drinking Fountain Cover Detail (TIF)
IRR-31 Recycled Water Retrofit Point Of Connection (TIF)